SSC JE New Vacancy 2025: Notification Out For 1340 Posts

SSC JE New Vacancy 2025: The Staff Selection Commission (SSC) has invited online Recruitment Applications (ORA) through a centralized recruitment drive from eager and eligible individuals for recruitment to the 1340 vacancies of Junior Engineer posts in the Engineering Categories through Employment Notification, which are available on the Staff Selection Commission (SSC) official website (www.ssc.gov.in).

Candidates interested in the job description and who have met all the eligibility requirements mentioned in the notification can apply online for posts like Junior Engineer (Civil, Mechanical & Electrical). You can apply online for SSC JE New Vacancy 2025 between 30th June 2025 and 21st July 2025, after which the application forms will not be accepted.

The SSC JE New Vacancy 2025 is a golden chance for eligible aspirants seeking government jobs in technical and engineering fields. This article gives complete information about the vacancies, eligibility, and selection process, and provides a comprehensive understanding of all aspects of the SSC JE Recruitment Notification 2025.

SSC JE New Vacancy 2025

SSC JE New Vacancy 2025 Highlights

Recruitment OrganizationStaff Selection Commission (SSC)
Post NameJunior Engineer (Civil, Mechanical & Electrical)
Vacancies1340
Job LocationAll India
Last date for Apply21 July 2025
Salary/ Pay ScalePay Level 6
Official Websitewww.ssc.gov.in
Join Us on TelegramJoin Now

Important Dates

  • The SSC JE New Vacancy 2025 Notification PDF was released on 30th June 2025.
  • The online application forms for recruiting Junior Engineer (Civil, Mechanical & Electrical) are open between 30th June 2025 and 21st July 2025.

SSC JE Exam Dates 2025

SSC JE Exam Dates 2025: The exam dates for SSC JE 2025 have been officially announced. The dates are given below:

SSC JE Paper I 2025 (Computer Based)27-31 October,2025
SSC JE Paper II 2025 (Computer Based)January-February, 2026

Eligibility Criteria

Age Limit

  • Junior Engineer (Civil, Mechanical & Electrical) Posts: The lower age limit for the candidates is 18 years old. The upper age limit for the candidates is given below. The crucial date for determining the age eligibility is July 01, 2025.
Post NameAge Limit (as on 01.07.2025)
Junior Engineer (Civil, Mechanical & Electrical)30 to 32 years

There will be age relaxations as per the Government of India’s norms:

  • OBC (Non-Creamy Layer): Relaxation of 3 years of age.
  • SC/ST candidates: Relaxation of 5 years of age.
  • PWD candidates: Additional relaxation as per government rules.

Vacancy

The number of vacancies released by the Staff Selection Commission (SSC) for the posts of Junior Engineer (Civil, Mechanical & Electrical) are as follows:

  • Junior Engineer (Civil, Mechanical & Electrical): 1340

Vacancy Details

OrganizationAvailable Post Name
Central Water CommissionJunior Engineer (Civil)
Junior Engineer (Mechanical)
Central Public Works Department (CPWD)Junior Engineer (Civil)
Junior Engineer (Electrical)
Border Road Organization (BRO)Junior Engineer (Civil)
(Electrical and Mechanical)
Military Engineer Services (MES)Junior Engineer(Civil)
Junior Engineer (Electrical and Mechanical)
Farrakka Barrage (Project)Junior Engineer (Civil)
Junior Engineer (Mechanical)
Department of Water Resources, River Development & Ganga Rejuvenation (Brahmaputra Board)Junior Engineer (Civil)
Ministry of Ports, Shipping & Waterways (Andaman Lakshadweep Harbour Works)Junior Engineer (Civil)
Junior Engineer (Mechanical)
National Technical Research Organization (NTRO)Junior Engineer (Civil)
Junior Engineer (Electrical)
Junior Engineer (Mechanical)

Education Qualification

Candidates must confirm they fulfill all the qualifying criteria before applying for this position. However, the authority has depicted the requirements for eligibility conditions as follows:

  • Junior Engineer (Civil, Mechanical & Electrical) Posts: The candidate should be qualified enough for SSC JE New Vacancy 2025 as given in the table below:
Post NameEssential Qualification
Junior Engineer (Civil)Candidates must have a Civil Engineering Degree or Diploma.
Junior Engineer (Mechanical)Candidates must have a Degree or Diploma in Mechanical Engineering.
Junior Engineer (Civil)Candidates must have a Diploma in Civil Engineering.
Junior Engineer (Electrical)Candidates must have a Diploma in Electrical Engineering.
Junior Engineer (Civil)Candidates must have a 3-year Diploma or a Degree in Civil Engineering.
(Electrical and Mechanical)Candidates must have a Degree or Diploma in Electrical or Mechanical Engineering along with 2 years of relevant work experience.
Junior Engineer(Civil)Candidates must have a Degree or Diploma in Civil Engineering along with 2 years of relevant experience in the field.
Junior Engineer (Electrical and Mechanical)Candidates must have a Degree or Diploma in Electrical or Mechanical Engineering with 2 years of relevant experience in the respective field.
Junior Engineer (Civil)Candidates must have a Diploma in Civil Engineering.
Junior Engineer (Mechanical)Candidates must have a Diploma in Mechanical Engineering.
Junior Engineer (Civil)Candidates must have a 3-year Diploma in Civil Engineering along with 2 years of relevant work experience in the field.
Junior Engineer (Civil)Candidates must possess a Diploma in Civil Engineering.
Junior Engineer (Mechanical)Candidates must possess a Diploma in Mechanical Engineering.
Junior Engineer (Civil)Candidates must have a Diploma in Civil Engineering.
Junior Engineer (Electrical)Candidates must have a Diploma in Electrical Engineering.
Junior Engineer (Mechanical)Candidates must have a Diploma in Mechanical Engineering.

Selection Procedure

The selection process of RRB Technician Recruitment 2025 will determine the applicants for the Technician Gr. I Signal and Technician Gr. III posts. As mentioned earlier, candidates must be qualified at every level to be appointed to the posts.

  1. Phase 1: Paper 1 (Computer Based Examination)
  2. Phase 2: Paper 2 (Computer Based Examination)
  3. Phase 3: PST/PET (Only For Border Road Organization (BRO) Posts)
  4. Phase 4: Document Verification
  5. Phase 5: Medical Test
  6. Phase 6: Final Selection List

SSC JE Paper I Syllabus and Exam Pattern

SSC JE Paper I Syllabus: The syllabus and examination pattern for the SSC JE Paper I 2025 are given below:

SubjectNo. of Question/Marks
(i) General Intelligence and Reasoning50/50
(ii) General Awareness50/50
(iii) Part-A: General Engineering (Civil & Structural)
or
Part-B: General Engineering (Electrical)
or
Part-C: Engineering (Mechanical)
100/100

Syllabus

a) General Intelligence & Reasoning:

Questions of both verbal and non-verbal types. The test may include
questions on analogies, similarities, differences, space visualization, problem
solving, analysis, judgment, decision-making, visual memory, discrimination,
observation, relationship concepts, arithmetical reasoning, verbal and figure
classification, arithmetical number series, etc. The test will also include
questions designed to test the candidate’s abilities to deal with abstract ideas
and symbols and their relationships, arithmetical computations and other
analytical functions.

b) General Awareness:

Current events and such
matters of everyday observations and experience in their scientific aspect as
may be expected of any educated person. The test will also include
questions relating to India and its neighboring countries especially pertaining
to History, Culture, Geography, Economic Scene, General Polity and Scientific
Research, etc.

c) General Engineering: Civil & Structural, Electrical and Mechanical:

Part-A (Civil Engineering):
Building Materials, Estimating, Costing and Valuation, Surveying, Soil
Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering,
Environmental Engineering.
Structural Engineering: Theory of Structures, Concrete Technology, RCC
Design, Steel Design.

Part-B (Electrical Engineering):
Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals,
Measurement and Measuring instruments, Electrical Machines, Fractional
Kilowatt Motors and single-phase induction Motors, Synchronous Machines,
Generation, Transmission and Distribution, Estimation and Costing,
Utilization and Electrical Energy, Basic Electronics.

Part-C Mechanical Engineering):
Theory of Machines and Machine Design, Engineering Mechanics and
Strength of Materials,
Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of
Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance,
IC Engines Combustion, IC Engine Cooling & Lubrication, Rankine cycle of
System, Boilers, Classification, Specification, Fitting & Accessories, Air
Compressors & their cycles, Refrigeration cycles, Principle of Refrigeration
Plant, Nozzles & Steam Turbines.
Properties & Classification of Fluids, Fluid Statics, Measurement of Fluid
Pressure, Fluid kinematics, Dynamics of Ideal fluids, Measurement of Flow
rate, Basic Principles, Hydraulic Turbines, Centrifugal Pumps, Classification of
Steel.

SSC JE Paper II Syllabus and Exam Pattern

SSC JE Paper II Syllabus: The syllabus and examination pattern for the SSC JE Paper II 2025 are given below:

SubjectNo. of Question/Marks
Part-A: General
Engineering (Civil &
Structural)
or
Part-B: General Engineering (Electrical)
or
Part-C: General
Engineering (Mechanical)
100/300

Syllabus

Part-A (Civil & Structural Engineering):

Building Materials:
Physical and Chemical properties, classification, standard
tests, uses and manufacture/quarrying of materials e.g., building stones,
silicate-based materials, cement (Portland), asbestos products, timber and
wood-based products, laminates, bituminous materials, paints, varnishes.


Estimating, Costing and Valuation:
Estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work–

earthwork, Brick work (Modular & Traditional bricks), RCC work,
Shuttering, Timber work, Painting, Flooring, Plastering, Boundary wall, Brick
building, Water Tank, Septic tank, Bar bending schedule, Centre line method,
Mid-section formula, Trapezodial formula, Simpson’s rule, Cost estimate of
Septic tank, flexible pavements, Tube well, isolates and combined footings,
Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value,
salvage value, assessed value, sinking fund, depreciation and obsolescence,
methods of valuation.

Surveying:
Principles of surveying, measurement of distance, chain
surveying, working of prismatic compass, compass traversing, bearings, local
attraction, plane table surveying, theodolite traversing, adjustment of
theodolite, Levelling, Definition of terms used in levelling, contouring,
curvature and refraction corrections, temporary and permanent adjustments
of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earthwork calculation, advanced surveying equipment

Soil Mechanics:
: Origin of soil, phase diagram, Definitions-void ratio, porosity,
degree of saturation, water content, specific gravity of soil grains, unit
weights, density index and interrelationship of different parameters, Grain
size distribution curves and their uses Index properties of soils, Atterberg’s
limits, ISI soil classification and plasticity chart
of permeability, determination of coefficient
Permeability of soil, coefficient
of permeability, Unconfined and
confined aquifers, effective stress, quick sand, consolidation of soils,
Principles of consolidation, degree of consolidation, pre-consolidation
pressure, normally consolidated soil, e- log p curve, computation of ultimate
settlement Shear strength of soils, direct shear test, Vane shear test, Triaxial
test Soil compaction, Laboratory compaction test, Maximum dry density
and optimum moisture content, earth pressure theories, active and passive
earth pressures, Bearing capacity of soils, plate load test, standard
penetration test

Hydraulics:

Fluid properties, hydrostatics, measurements of flow, Bernoulli’s
theorem and its application, flow through pipes, flow in open channels,
weirs, flumes, spillways, pumps and turbines

Irrigation Engineering:
Definition, necessity, benefits, 2II effects of irrigation,
types and methods of irrigation, Hydrology – Measurement of rainfall, run
off coefficient, rain gauge, losses from precipitation – evaporation,
infiltration, etc. Water requirement of crops, duty, delta and base period,
Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap
allowance, Irrigation efficiencies Different types of canals, types of canal
irrigation, loss of water in canals Canal lining– types and advantages Shallow and deep to wells, yield from a well Weir
and barrage, Failure of weirs and permeable foundation, Slit and Scour,
Kennedy’s theory of critical velocity Lacey’s theory of uniform flow Definition
of flood, causes and effects, methods of flood control, water logging,
preventive measure Land reclamation, Characteristics of affecting fertility of
soils, purposes, methods, description of land and reclamation
Major irrigation projects in India

Transportation Engineering:
Highway Engineering – cross-sectional
elements, geometric design, types of pavements, pavement materials –
aggregates and bitumen, different tests, Design of flexible and rigid
pavements – Water Bound Macadam (WBM) and Wet Mix Macadam
(WMM), Gravel Road, Bituminous construction, Rigid pavement joint,
pavement maintenance, Highway drainage, Railway Engineering-
Components of permanent way – sleepers, ballast, fixtures and fastening,
track geometry, points and crossings, track junction, stations and yards
Traffic Engineering – Different traffic survey, speed-flow-density and their
interrelationships, intersections and interchanges, traffic signals, traffic
operation, traffic signs and markings, road safety

Environmental Engineering:
Quality of water, source of water supply,
purification of water, distribution of water, the need of sanitation, sewerage
systems, circular sewer, oval sewer, sewer appurtenances, sewage
treatments Surface water drainage Solid waste management – types, effects,
engineered management system Air pollution – pollutants, causes, effects,
control Noise pollution – cause, health effects, control

Structural Engineering:

Theory of structures:
Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply
supported, cantilever and over hanging beams Moment of area and moment
of inertia for rectangular & circular sections, bending moment and shear
stress for tee, channel and compound sections, chimneys, dams and
retaining walls, eccentric loads, slope deflection of simply supported and
cantilever beams, critical load and columns, Torsion of circular section.


Concrete Technology:
Properties, Advantages and uses of concrete, cement
aggregates, importance of water quality, water cement ratio, workability,
mix design, storage, batching, mixing, placement, compaction, finishing and
curing of concrete, quality control of concrete, hot weather and cold weather
concreting, repair and maintenance of concrete structures
RCC Design:
RCC beams-flexural strength, shear strength, bond strength,
design of singly reinforced and double reinforced beams, cantilever beams T
beams, lintels One-way and two-way slabs, isolated footings Reinforced brick
works, columns, staircases, retaining wall, water tanks (RCC design questions
may be based on both Limit State and Working Stress methods)
Steel Design:
Steel design and construction of steel columns, beams roof
trusses plate girders

Part-B (Electrical Engineering):

Basic concepts:
Concepts of resistance, inductance, capacitance, and various
factors affecting them Concepts of current, voltage, power, energy and their
units
Circuit law:
Kirchhoff’s law, Simple Circuit solution using network theorems
Magnetic Circuit:
Concepts of flux, mmf, reluctance, Different kinds of
magnetic materials, Magnetic calculations for conductors of different
configurations e.g., straight, circular, solenoidal, etc. Electromagnetic
induction, self and mutual induction
AC Fundamentals:
Instantaneous, peak, RMS and average values of
alternating waves, Representation of sinusoidal wave form, simple series and
parallel AC Circuits consisting of RL and C, Resonance, Tank Circuit Poly Phase
system – star and delta connection, 3 phase power, DC and sinusoidal
response of R-Land R-Circuit

Measurement and measuring instruments:
Measurement of power (1 phase
and 3 phase, both active and re-active) and energy, 2 wattmeter methods of
3 phase power measurement, Measurement of frequency and phase angle
Ammeter and voltmeter (both moving oil and moving iron type), extension of
range wattmeter, Multimeters, Megger, Energy meter AC Bridges Use of
CRO, Signal Generator, CT, PT and their uses Earth Fault detection
Electrical Machines:
(a) DC Machine – Construction, Basic Principles of DC
motors and generators, their characteristics, speed control and starting of
DC Motors Method of braking motor, Losses and efficiency of DC Machines
(b) 1 phase and 3 phase transformers – Construction, Principles of operation,
equivalent circuit, voltage regulation, OC and SC Tests, Losses and efficiency
Effect of voltage, frequency and wave form on losses Parallel operation of 1
phase /3 phase transformers Auto transformers (c) 3 phase induction
motors, rotating magnetic field, principle of operation, equivalent circuit,
torque-speed characteristics, starting and speed control of 3 phase induction
motors Methods of braking, effect of voltage and frequency variation on
torque speed characteristics Fractional Kilowatt Motors and Single-Phase Induction Motors:
Characteristics and applications

Synchronous Machines :

Generation of 3-phase emf armature reaction,
voltage regulation, parallel operation of two alternators, synchronizing,
control of active and reactive power Starting and applications of
synchronous motors

Generation, Transmission and Distribution – Different types of power
stations, Load factor, diversity factor, demand factor, cost of generation,
inter-connection of power stations Power factor improvement, various types
of tariffs, types of faults, short circuit current for symmetrical faults
Switchgears – rating of circuit breakers, Principles of arc extinction by oil and
air, HRC Fuses, Protection against earth leakage / over current, etc.
Buchholtz relay, Merz-Price system of protection of generators &
transformers, protection of feeders and bus bars Lightning arresters, various
transmission and distribution system, comparison of conductor materials,
efficiency of different system Cable – Different type of cables, cable rating
and derating factor

Estimation and costing:
Estimation of lighting scheme, electric installation of
machines and relevant IE rules Earthing practices and IE Rules
Utilization of Electrical Energy:
Illumination, Electric heating, Electric
welding, Electroplating, Electric drives and motors
Basic Electronics:
Working of various electronic devices e.g. P N Junction
diodes, Transistors (NPN and PNP type), BJT and JFET Simple circuits using
these devices

Part- C (Mechanical Engineering)
:

Theory of Machines and Machine Design:
Concept of simple machine, four bar linkage and link motion, Flywheels and
fluctuation of energy, Power transmission by belts – V-belts and Flat belts,
Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and
gear ratio calculation, Governors – Principles and classification, Riveted
joint, Cams, Bearings, Friction in collars and pivots
Engineering Mechanics and Strength of Materials:
Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain,
Elastic limit and elastic constants
, bending moments and shear force diagram,
Stress in composite bars, Torsion of
circular shafts, Bucking of columns–Euler’s
and Rankin’s theories, Thin-walled pressure vessels
Thermal Engineering:
Properties of Pure Substances
: p-v & P-T diagrams of pure substance like H2O,
Introduction of steam table with respect to steam generation process; definition
of saturation, wet & superheated status Definition of dryness fraction of steam,
degree of superheat of steam H-s chart of steam (Mollier’s Chart)

1st Law of Thermodynamics:
Definition of stored energy & internal energy,
1st Law of Thermodynamics of cyclic process, Non-Flow Energy Equation,
Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady
Flow; Steady State Steady Flow Energy Equation
2nd Law of Thermodynamics:
Definition of Sink, Source Reservoir of Heat,
Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius
Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic
Scale of temperature, Clausius Integral, Entropy, Entropy change calculation
of ideal gas processes Carnot Cycle & Carnot Efficiency, PMM-2; definition &
its impossibility
Air standard Cycles for IC engines:
Otto cycle; plot on P-V, T-S Planes;
Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency.
IC Engine Performance, IC Engine Combustion, IC Engine Cooling &
Lubrication

Rankine cycle of steam:
Simple Rankine cycle plot on P-V, T-S, h-s planes,
Rankine cycle efficiency with & without pump work
Boilers; Classification; Specification; Fittings & Accessories: Fire Tube &
Water Tube Boilers
Air Compressors & their cycles; Refrigeration cycles; Principle of a
Refrigeration Plant; Nozzles & Steam Turbines

Fluid Mechanics & Machinery:

Properties & Classification of Fluid:
ideal & real fluids, Newton’s law of
viscosity, Newtonian and Non-Newtonian fluids, compressible and
incompressible fluids
Fluid Statics:
Pressure at a point
Measurement of Fluid Pressure:
Manometers, U-tube, Inclined tube
Fluid Kinematics
Stream line, laminar & turbulent flow, external & internal
flow, continuity equation
Dynamics of ideal fluids
Bernoulli’s equation, Total head; Velocity head;
Pressure head; Application of Bernoulli’s equitation
Measurement of Flow rate Basic Principles
Venturi meter, Pilot tube,
Orifice meter
Hydraulic Turbines
Classifications, Principles

Centrifugal Pumps:
Classifications, Principles,Performance Production Engineering:

Classification of Steels:
mild steel & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques
i.e., TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT,
Foundry & Casting – methods, defects, different casting processes, Forging,
Extrusion, etc., Metal cutting principles, cutting tools, Basic Principles of
machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding,
Machines, tools & manufacturing processes.

How to apply for SSC JE 2025 Online Application Form

  1. Check your eligibility first from the notification of SSC JE New Vacancy 2025 for multiple Posts.
  2. Go to the official website.
  3. You need to download the SSC JE New Vacancy 2025 Notification first to check your eligibility.
  4. Click on the link “Apply Online” on the recruitment portal of the Staff Selection Commission.
  5. Register yourself by clicking on “New Registration” if not registered already.
  6. After registering, or if already registered, the candidate must log in to his or her account on the OTR page. Once logged in, the candidate will see a list of live advertisements on the dashboard. The candidate will only apply for a specific position through this portal. The candidate’s application will be submitted only after uploading the required papers as specified in the advertisement.
  7. Pay the fees.
  8. Take the printout of the SSC JE 2025 Application Form for future reference.

Application Form Fees

  • General/EWS/OBC: Rs. 100/-
  • SC/ST/PwBD: Rs. Nil/-

Important Links

Official Notification PDFDownload
Online Application Form Link (From 30th June 2025)Apply Online
SSC Official WebsiteClick Here
Check Other Govt. JobsTrending Rojgar

Frequently Asked Questions (FAQs)

Question 1: How can I download the SSC JE New Vacancy 2025 For various Posts?

Answer: You can download the official notification from the Official website of the Staff Selection Commission.

Question 2: What is the Qualification for SSC JE New Vacancy 2025?

Answer: Read the above section on educational qualifications.

Question 3: What is the age criteria for SSC JE New Vacancy 2025?

Answer:

  • SSC JE Recruitment 2025: The lower age limit for the candidates is 18 years old. The upper age limit for the candidates is 30 and 32 years old.

Question 4: How can I fill out the SSC JE 2025 application Online form?

Answer: Please refer to the above section of How to apply for SSC JE various posts Online Form.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top